Stubborn brake dust on bellone wheels

[Spaniard]

Can anyone out there advise me on the best products to remove stubborn brake dust on the inside of my bellone wheels. Im wanting to use the right stuff cause it seems to me that these alloys are painted black and I don't want to destroy the paint finish!!!!

[Clean Your Ride]

Just use a fallout remover such as IronX, Sonax Full Effect Wheel Cleaner or Bilt Hamber Autowheels/Korrosol, spray, leave, agitate, pressure wash off, done. Also best to apply a tar remover after this as there will no doubt be tar deposits on the inside of the alloys too.







Don't use a brush on the front face of the alloys as this will cause microscratches. Once cleaned and dried then be sure to either wax or better still seal your alloys to prevent a repeat in the future. Future cleaning will be sufficient enough with just a shampoo.





See my video of IronX in action here


https://www.youtube.com/watch?v=YzfjhpmTQuo

[J1MB08]

"Wheel woollies" to brush them. There's loads of stuff that will break down brake dust.