No no bumper removal needed. I just used ramp at sptuning and fixed it on. Although some trimming will be needed to get ir to fit snuggly.
Announcement
Collapse
No announcement yet.
DS3 front spoiler
Collapse
X
-
How fixed Matt- Nut n bolt, rivet, clips, adhesive or combination?
Also theres a rubber trim on the THP where the splitter should be. Is that removed or just hidden. Spose it must be removed?
CBLUELast edited by Chris_Blue; 06-08-2012, 07:10.sigpicJog on Noddy
Comment
-
You need to remove existing rubber lip, it just unclips.
Once removed offer up the new splitter, it should over hang the edge of the bumper on each side by around 2-3 cm's. We found it easier to hold in place temporarily with masking tape. When you've got it position you can seen what bits need trimming off the splitter for a more snug fit. Leave the 2-3cm ends until you've got it properly fixed on. We fixed ours by drilling through the splitter and bumper with a 3.5mm drill bit and then securing with screws. Tip- drill and fix front edge first, then do each side last, this helps you align it whilst you drill the holes down the sides.
Finally trim the ends off flush with bumper edge. Hacksaw is best for this job.
Shouldn't take you much longer than an hour providing you have got the tools handy.
www.SPTuning.co.ukWhite on red THP
Miltek exhaust with HKS highflow cat, Forge intercooler, hard pipe kit, induction kit, oil catch tank, , VAG BOV, Stage 3 SPT remap 217 BHP
Comment
-
Warning thread revival
Not the spoiler- does anyone know if they do the wheel arch extensions as on the DS3r as aftermarket kit, or spares?
Thinking bout fitting to the THP- Same body as DS3r are they not?
As for the front spoiler, decided not to change as the rubber flexible one on mine has taken a couple scrapes on kerbs and speed bumps
And if I fitted a hard spec plastic spoiler- it would be ripped off after a while
CBLUEsigpicJog on Noddy
Comment
-
Originally posted by Chris_Blue View PostYep- been quoted £700 odd for a set
Any idea of the differences?
May see if I can go custom made
CBLUE
Comment
-
Nice one Fish- interesting site
Seen it before and tried joining it before
Couldnt see the prices so tried joining up again today, but didnt accept my details, again
Seems to suggest mainland Germany only
Shame- liked the look of the BLACK Tiberon kit- only wheel extensions trim tho
CBLUEsigpicJog on Noddy
Comment
-
Originally posted by Dangerousfish View PostMusketier have some also, not sure if these are the same as the cituning ones too.
Do you happen to know if anyone has bought those? I am interested in having those arches.. I am just not sure about fitment and if one needs to change anything else
to make it look stock.2006 Peugeot 206 1.6 110hp (Sold)
2002 Subaru Impreza WRX 2.0 Turbo 230hp (Sold)
2003 Honda S2000 2.0 240hp (Sold)
2012 Citroen DS3 Sport 1.6 Turbo 165hp (Current)
Comment
-
Hi, I do not have the arches but do have the rear diffuser panel from Musketier and the fit is spot on with that.Originally posted by cyclone
It is in the handbook. Satisfied.
Originally posted by Broda
I would rather teabag a bear trap
Comment
Comment