Makeover

[dsratz]

Cheers Moran.

[Chris_Blue]

Have used a pressure washer on my wheels and calipers without lacquer, and the decals have never come off- suppose theres always time

[dsratz]

Cheers Chris, good to know.

[FLP]

A bit of a bump, but dsratz, I have a question for you.

I'm planning to lower mine 35mm too this summer, and probably add the splitter too in the future. Could you measure the ground clearance at the splitter for me please? There are very strict rules here in Belgium when it comes to lowering your car, and I don't want to get into trouble afterwards... Thanks in advance!

[dsratz]

No problem FLP, i will sort that for you and reply back ASAP

[TomAsprey]

No problem FLP, i will sort that for you and reply back ASAP

Where did you get the splitter from mate?

[dsratz]

OK so the clearance on the front splitter is 110mm , hope that helps.

Tom the splitter is from Tripple R composites. http://www.triplercomposites.com

[XanderCage13]

Great colour on the breaks. Nicely done!

[FLP]

OK so the clearance on the front splitter is 110mm , hope that helps.

Great! Thanks very much!! Minimum clearance needs to be 11cm over here, with a tolerance of 2cm. So I'll be fine then.