Announcement

Collapse
No announcement yet.

engine management light

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • engine management light

    Hi can any one help I have a ds3 ehdi 90 the problem is the engine management light comes on with no loss of power, disconnected the battery and problem cleared any ideals what could be causing this many thanks

    Sent from my C6833 using Tapatalk

  • #2
    Have the stored fault codes read, no way to even guess without that.
    Originally posted by cyclone
    It is in the handbook. Satisfied.
    Originally posted by Broda
    I would rather teabag a bear trap

    Comment


    • #3
      Hi thanks,I have a code reader tool but when I plugged it there where no codes showing so I just opened the bonnet and disconnected the battery and pulled a few sensor plugs really connected the battery turned the key restarted car and light had gone out

      Sent from my C6833 using Tapatalk

      Comment


      • #4
        There are a couple of "levels" for the codes bet if it was hooked up to a factory diagnostic box the code would show. But honestly I would wait to see if it comes back before doing anything.
        Originally posted by cyclone
        It is in the handbook. Satisfied.
        Originally posted by Broda
        I would rather teabag a bear trap

        Comment


        • #5
          I had this problem same engine as yours.i had a couple of codes which I cleared with torque pro but light kept coming back.
          Dealer cleared the codes and no problems since.
          The dealer told me that the car can sometimes throw up a light for no reason.


          Sent from my SM-G850F using Tapatalk

          Comment

          Working...
          X