Dash Cam

[simmo1]

Please advise which fuse in DS3 should be tapped when installing dash cam !

[cyclone]

I would go right off the power point under the hand brake and run the wires under carpeting under the seats and door sill trim then up under A pillar trim and over to rearview mirror area tucking wires under headliner.

[simmo1]

I want to tap off relevant fuse in fuse box!

[cyclone]

Look in your handbook to find what all the fuses do and pick one that satisfies your needs, that is if you want constant or switched power and how many amps it pulls.

[Dangerousfish]

I want to tap off relevant fuse in fuse box!

12v accessory port should be fine.

[SpottyDog]

If it's the nextbase hard wire kit you have, I have mine piggy backing the fuse on the head unit. I did try to use any of the fuses by the glovebox, but found it was powered even when the ignition was off thus draining battery.


Sent from my iPhone using Tapatalk

[simmo1]

Thank you for info, that is what I found, but could you please let me know the location of fuse head unit.
Many thanks.

[Dangerousfish]

Thank you for info, that is what I found, but could you please let me know the location of fuse head unit.
Many thanks.

I'd imagine he's referring to a fuse actually attached to the headunit. I'm not sure if that's there on a standard HU.