Tweet
Hey,
I want to fit an oil catch can for the front and rear PCV lines. I will use a dual catch can made by saikou michi whitch has 19 mm ID inlets and oulets.
In order to choose the correct hoses and reduction fittings i need to know the following dimensions:
1.The OD of the tube that goes from the intake to the valve cover (The tube itself not the locking plastic thingy). I will push a hose on that tube and then use a reduction coupling to a 19mm ID hose.
2.The ID of the tube in the valve cover. It looks that i wont be able to push a hose on that tube because its very short (Correct me if im wrong) so i will push a hose in it and then use a coupling to the 19 mm hose.
Ill be very thankful for any help or advise.
Thank you,
Alex.
I want to fit an oil catch can for the front and rear PCV lines. I will use a dual catch can made by saikou michi whitch has 19 mm ID inlets and oulets.
In order to choose the correct hoses and reduction fittings i need to know the following dimensions:
1.The OD of the tube that goes from the intake to the valve cover (The tube itself not the locking plastic thingy). I will push a hose on that tube and then use a reduction coupling to a 19mm ID hose.
2.The ID of the tube in the valve cover. It looks that i wont be able to push a hose on that tube because its very short (Correct me if im wrong) so i will push a hose in it and then use a coupling to the 19 mm hose.
Ill be very thankful for any help or advise.
Thank you,
Alex.
Comment