Throttle body failed

[crazyazz]

Hi guys,

The throttle body seems to have failed on my 2010 DS3. What is involved in replacing it? I have diabox , does anyone know the part number and cheapest place to source one? Im located in Australia

Any help would be greatly appreciated

P2101 Motorised throttle motor control fault

Properties
From : Local
Status : Permanent fault
Fault characterisation : Overheating
List of associated variables
Engine speed 1171 rpm Engine coolant temperature 28 °C Vehicle speed 0 Kph Inlet manifold pressure 450 mBar
Richness regulation status
Open loop (conditions for switching to a closed loop not yet satisfied)
Calculated charging value (filling)
23 %
Quick richness correction (row 1)
0 %
Slow richness correction (row 1)
0 %
P1161Throttle position regulation fault
Properties
From : Local
Status : Permanent fault
Fault characterisation :
Short circuit to earth or short circuit to positive or coherence
List of associated variables
Engine speed 837 rpm Engine coolant temperature 48 °C Vehicle speed 0 Kph Inlet manifold pressure 340 mBar
Richness regulation status
Open loop (conditions for switching to a closed loop not yet satisfied)
Calculated charging value (filling)
19 %
Quick richness correction (row 1)
0 %
Slow richness correction (row 1)
-3 %

P3011 Throttle position regulation fault

Properties
From : Local
Status : Permanent fault
Fault characterisation : Return spring ineffective
List of associated variables
Engine speed 111 rpm Engine coolant temperature 17 °C Vehicle speed 0 Kph Inlet manifold pressure 950 mBar Richness regulation status Value invalid Calculated charging value (filling) 81 % Quick richness correction (row 1) 0 % Slow richness correction (row 1) -2 %
P3010
Fault: difference between the reference value and actual value of the throttle or throttle stuck
Properties
From : Local
Status : Permanent fault
Fault characterisation : Coherence
List of associated variables
Engine speed 2071 rpm Engine coolant temperature 99 °C Vehicle speed 18 Kph Inlet manifold pressure 450 mBar Richness regulation status Closed loop Calculated charging value (filling) 21 % Quick richness correction (row 1) -5 % Slow richness correction (row 1) -2 %


P2102 Motorised throttle motor control fault


Properties
From : Local
Status : Permanent fault
Fault characterisation : Short circuit to earth or short circuit to positive
List of associated variables
Engine speed 2071 rpm Engine coolant temperature 99 °C Vehicle speed 18 Kph Inlet manifold pressure 450 mBar
2 of 3 31/01/2018 5:42 PM
Richness regulation status Closed loop Calculated charging value (filling) 21 % Quick richness correction (row 1) -5 % Slow richness correction (row 1) -2 %
Help

[Kieron]

To replace the throttle body you need to take out your inlet manifold and take the inlet pipe off the manifold its self if your looking for a cheap one try eBay but might not be as reliable as a new one

Sent from my SM-G950F using Tapatalk