If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi, after some guidance, when I first switch on I get a message on the display reading ‘Automatic brake fault’ Could anyone tell me the possible problem please.
Thanks in advance
Had something similar on my Golf- hacking along at (cough) 70mpf, and the sensors decided to apply the brake if they thought I was too close to the next car....!!!
Think it was only in cruise, but very unnerving
Thanks for the replys. It’s only done 6000 miles and I bought it privately, so no warranty, might be worth switching it off if it could put the brakes on at the wrong time.
Here’s fault that occurred in the vehicle with brakes I want to fix it but cannot do it. Upon this, I showed my myessaygeeks review to my mechanics and now he will fix it for me.
The faults are usual but the real programmer is, who minimizes the risk t almost zero that this is no more a problem and for this smart home is the best option right now where the problems can be minimized to loose the data for the long time.
Comment