Canbus LED bulbs not working correctly

[BigChris]

They appear to be blinking/flickering. These bulbs are made up of 5 LEDs. 4 going around the sides and one on the top. I think it's only one or two of the LEDs that seems to be flickering. There is no dirt on the bulbs and I believe I have fitted them correctly.

How could I correct this?

Thanks

[Clean Your Ride]

You can correct this by buying a new bulb. In my experience it sounds fudukered.

Sent from my Experia Z tablet using Tapatalk

[BigChris]

I've tried using new bulbs too

[bluenose62]

I had the same problem, tried new ones, and couldn't even get one side to work at all, put the originals back in

[lfcrule1972]

Perhaps they aren't really canbus error free ? I had this recently and in the end binned the set and puck up some alternatives and they've been fine

[peter m]

They appear to be blinking/flickering. These bulbs are made up of 5 LEDs. 4 going around the sides and one on the top. I think it's only one or two of the LEDs that seems to be flickering. There is no dirt on the bulbs and I believe I have fitted them correctly.

How could I correct this?

Thanks

Similar problems with my canbus free 5 led's which had no problems for last 6 months then started flickering,found the small resistor that's fitted on them had fallen off ,possibly due solder melting?back to standard side light bulbs at moment.

[lfcrule1972]

Yeah that happened on the first set I bought from eBay too.... I out it down to cheap Chinese LEDs