If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
sorry if this has been said before but how do change the battery out of the ds3 key fobas mine is nearly dead as I can't find any tutorials on the web to do it ? Pictures would be great also
Changing the battery
Battery ref.: CR1620/3 volts. ) Unclip the casing by inserting a coin at the
notch and rotating.
) Slide the flat battery out of its location.
) Slide the new battery into its location
observing the original direction.
) Clip the casing in place, then the chrome
finisher.
) Reinitialise the remote control.
If the battery is flat, you are
informed by lighting of this warning
lamp in the instrument panel, an audible signal
and a message in the multifunction screen.
) Unfold the key.
) Release the chrome finisher by pressing on
lug A.
) Maintain pressure on lug A and remove the
chrome finisher by sliding it off at 45°.
The English version and German are just translations of the French one, nothing different or special, and by the way I have the English handbook not German.
PS I would have thought you would be smart enough to know they do not sell Citroens in America
Originally posted by cyclone
It is in the handbook. Satisfied.
Originally posted by Broda
I would rather teabag a bear trap
No they do not. I believe it is an EU directive that only people that care to properly operate and maintain the moderately expensive machine that they have purchased be given the handbook. The rest of the I like to revel in my ignorance crowd has to do without. This saves the natural resources of the world that would otherwise just be wasted
Originally posted by cyclone
It is in the handbook. Satisfied.
Originally posted by Broda
I would rather teabag a bear trap
Comment