How to remove throttle body?

[Espasa]

Hey guys! I have a citroen DS3 with the THP engine. Does anyone know how to remove the throttle body from the intake manifold? I managed to remove the piping but I can't see the throttle body and how many bolts it has. Should this work be done from under the car?

Thanks and cheers!!

[Jamie@SPTuning]

It has 3 30torx screws around the body which you get from above, also slide up white plastic locating clip...

[Espasa]

It has 3 30torx screws around the body which you get from above, also slide up white plastic locating clip...

Thanks Jamie!!!! It would be good to use a mirror to see the screws? The white plastic locating clip you mention wheres is it? Should I replace the gasket after removing it? It's so hard to work when I can't see!!

[Jamie@SPTuning]

How to remove throttle body?

White clip slides into groove on back manifold above the throttle body. I think it's just to hold the throttle body in place whilst re fitting.
Yes, recommend having a new rubber seal to hand as the old one go brittle and crack.
Yes can use mirror too see them better but I just feel for them

[Espasa]

Thanks alot! I'm gonna try it. Cheers!