Tweet
If you have installed DiagBox on your favourite PC, you have most certainly noted that a lot of strange stuff
is being started up when you boot your PC. This is of course fine, if you are using DiagBox a lot.
But if you are only using it for your own car, hopefully you are not using it a lot :-/
So how to avoid all this stuff running?
You could of course uninstall DiagBox, but since it takes several hours to install it again, this is probably not what you want.
So here is what I did in order to regain my ownership of the PC
A lot of processes run as soon as you boot your PC when you have installed DiagBox.
This is not making your PC faster or better!
I use Xp, so there might be differences if you use another operating system.
I use a simple method, just renaming all the folders installed by DiagBox.
The more "correct" way would of course be to find the places where these directories are accessed, and stop it there.
But this simple method is probably faster and easier to remember.
Re-enabling DiagBox is real quick this way.
In order to be allowed to rename some of the folders, you will have to kill some running processes using the TaskManager.
Processes to kill:
eclipse.exe (God know why this is running!)
fbguard.exe
fbserver.exe
httpd_ddc.exe (two processes)
j9w.exe
psaAgent.exe
psaSingleSignOnDaemon.exe
sim.exe
After this I rename as follows:
C:\APP -> C:\REN_APP
C:\AWRoot -> C:\REN_AWRoot
C:\Backup_DB -> C:\REN_Backup_DB
C:\CDTELE -> C:\REN_CDTELE
Now rebooting the PC does not start all this garbage each and every time.
If you have to use DiagBox again, all you have to do is deleting all the "REN_" in the folder names
and reboot.
You can of course in stead of "REN_" use "RENAMED_IN_ORDER_TO_AVOID_DIAGBOX_PROCESSES_TO_ST ART_UP_AND_SLOW_DOWN_MY_PC_" :-)
Johny
is being started up when you boot your PC. This is of course fine, if you are using DiagBox a lot.
But if you are only using it for your own car, hopefully you are not using it a lot :-/
So how to avoid all this stuff running?
You could of course uninstall DiagBox, but since it takes several hours to install it again, this is probably not what you want.
So here is what I did in order to regain my ownership of the PC
A lot of processes run as soon as you boot your PC when you have installed DiagBox.
This is not making your PC faster or better!
I use Xp, so there might be differences if you use another operating system.
I use a simple method, just renaming all the folders installed by DiagBox.
The more "correct" way would of course be to find the places where these directories are accessed, and stop it there.
But this simple method is probably faster and easier to remember.
Re-enabling DiagBox is real quick this way.
In order to be allowed to rename some of the folders, you will have to kill some running processes using the TaskManager.
Processes to kill:
eclipse.exe (God know why this is running!)
fbguard.exe
fbserver.exe
httpd_ddc.exe (two processes)
j9w.exe
psaAgent.exe
psaSingleSignOnDaemon.exe
sim.exe
After this I rename as follows:
C:\APP -> C:\REN_APP
C:\AWRoot -> C:\REN_AWRoot
C:\Backup_DB -> C:\REN_Backup_DB
C:\CDTELE -> C:\REN_CDTELE
Now rebooting the PC does not start all this garbage each and every time.
If you have to use DiagBox again, all you have to do is deleting all the "REN_" in the folder names
and reboot.
You can of course in stead of "REN_" use "RENAMED_IN_ORDER_TO_AVOID_DIAGBOX_PROCESSES_TO_ST ART_UP_AND_SLOW_DOWN_MY_PC_" :-)
Johny
, what version have you installed upto?
Comment