Tweet
Bought this today as knew had some claying to do on a Hyundai i20.
Opened up and one side (pink) is a MF type of fabric
With the other side (black) feeling quite rubbery
Washed car 2BM, then decided to use mitt with a shampoo (G3 Detox), firstly loading up the mitt with the soapy water and applying it with the pink side.
Another dunk into the water then, flip the mitt over and use rubbery side on the paintwork.
Initially can hear the mitt rubbing over the dirt and contaminates but after about 20 seconds or so, no more noise indicating that mitt is working.
Rinse with open ended hose to leave this. (Only left hand side of bonnet done at this stage)
Onto the base of the passenger front door. Note the stains not shifted from the earlier 2BM.
After a pass with the mitt and a rinse
Bootlid before
Bootlid after
Base of drivers door now, before
Base of drivers door, after
One handed video (sorry) showing ease of use
https://www.youtube.com/watch?v=0Vu2...e_gdata_player
Initially was very sceptical about a clay mitt, never be as good as my BH clay but I was wrong and am now a convert. FANBLOODYTASTIC. Did like to in the past look at the clay bar after each panel to see what had been lifted. Just got to get used to not being able to do that now.
For £12.99, get to Halfords and get one NOW!!!!
Cheers again Gleemspray for the initial heads up.
Sent from my Experia Z tablet using Tapatalk
Opened up and one side (pink) is a MF type of fabric
With the other side (black) feeling quite rubbery
Washed car 2BM, then decided to use mitt with a shampoo (G3 Detox), firstly loading up the mitt with the soapy water and applying it with the pink side.
Another dunk into the water then, flip the mitt over and use rubbery side on the paintwork.
Initially can hear the mitt rubbing over the dirt and contaminates but after about 20 seconds or so, no more noise indicating that mitt is working.
Rinse with open ended hose to leave this. (Only left hand side of bonnet done at this stage)
Onto the base of the passenger front door. Note the stains not shifted from the earlier 2BM.
After a pass with the mitt and a rinse
Bootlid before
Bootlid after
Base of drivers door now, before
Base of drivers door, after
One handed video (sorry) showing ease of use
https://www.youtube.com/watch?v=0Vu2...e_gdata_player
Initially was very sceptical about a clay mitt, never be as good as my BH clay but I was wrong and am now a convert. FANBLOODYTASTIC. Did like to in the past look at the clay bar after each panel to see what had been lifted. Just got to get used to not being able to do that now.
For £12.99, get to Halfords and get one NOW!!!!
Cheers again Gleemspray for the initial heads up.
Sent from my Experia Z tablet using Tapatalk
Comment