Catch Can on

It will do until I'm home next when il follow cyclones lead and plumb the other pipe in. still not happy with the connection at the top, not as snug as id like so will look into that.

[Jamie@SPTuning]

Nice tidy job!

[Chris_Blue]

So long as it works. Maybe take the mileage and see how much builds up in 2000 miles or so.

[Superfly Guy]

I looked at looping it clockwise but the pipe would have sat a little too high for my liking, so I went with a slightly longer cut for a gentle bend. I tell you what though, this car must have the hottest engine known to man, and it stays hot for ever.

@ Jamie, can the cover above the HT caps be removed, I would like to secure the plug with a jubbly clip but cant do it with that cover in place.

[Superfly Guy]

So long as it works. Maybe take the mileage and see how much builds up in 2000 miles or so.

Wont do anything near that while im away (un)fortunately. Il be interested to see what is in it when I get back (hopefully Jamie will have the blaster by then )

[Chris_Blue]

The engine does get, and stay hot, that why i cut in bonnet vents.
According to torque pro, the temperature doesnt get as nearly as high, at high speeds
Also helps cooling down (A lot) when engine switched off. Been advised it will be good as a hand warmer in winter too LOL

[Superfly Guy]

Bonnet vents???

[Chris_Blue]

Yeah- cut some bonnet vents over the winter, keeps the temperature down effectively
Seems to stop the engine feeling a bit "dead" at the top of the rev range in each gear

[Superfly Guy]

Yeah- cut some bonnet vents over the winter, keeps the temperature down effectively
Seems to stop the engine feeling a bit "dead" at the top of the rev range in each gear

I meant bonnet vents as in did you cut holes in your bonnet?

[Chris_Blue]

I meant bonnet vents as in did you cut holes in your bonnet?

Yes....

[Superfly Guy]

Blimey, is that not a little extreme. Any chance of some pics.

[Chris_Blue]

ED- Heres one of the vents. Looks good tho, so Ive been told by others
But its the heat dissapation i was after
Got hold of a second hand bonnet... in same colour which was nice

Heres bonnet prior to fitting

[Gazski66]

[ATTACH=CONFIG]9256[/ATTACH]

ED- Heres one of the vents. Looks good tho, so Ive been told by others
But its the heat dissapation i was after
Got hold of a second hand bonnet... in same colour which was nice

Heres bonnet prior to fitting

[ATTACH=CONFIG]9257[/ATTACH]

Looks good, should have done them as the DS3 logo

[Gazski66]

Nice job SFG, looks very neat, wait to you see what comes out of it

[Superfly Guy]

Looks good Chris, did you have them professionally laser cut.