Announcement
Collapse
No announcement yet.
Tyre Wear
Collapse
X
-
http://www.ds3club.co.uk/attachment....4&d=1420569803
:rolleyes: Too Good For Heaven & Too Bad For Hell :mad:
sigpic
-
Just for info I have done 74000 and still have 4mm on the rears well one of them as the other had a puncture that could not be repaired these are the original tyres and I'm on my third front set
Second front set were P Zero Nero's but back to conti's now
Comment
-
Hi all, just had 2nd year service done with 12k on the clock. Was told front tyres were 72% worn. Is this normal for low mileage.
Tyres are Michelin. Previous car was a Fiesta which I had for 5 years and sold on with original tyres.
Seems like DS3's are pretty rubbish on tyre wear.
Comment
-
What does that mean, 72% worn? Is the wear uneven or are they down to under 2mm? FYI, I'm on the original Pirelli tyres and at 12K I've got 4mm all round."I'm a writer. I give the truth scope."
https://www.facebook.com/profile.php?id=100010501688560
Comment
-
Most new tyres are around 9mm to bare
you must have 1.6mm tread to be legal, anything less is dangerous and points on your licence
Am guessing that theyve told you, you are just over 2/3rds of the way to 1.6mm
which at a guess is about 3.5 to 4mm.
They will have told you what the lowest point is. The outside of the tyres either side, for about an inch, don't count
1.6mm is needed across the centre section
Its in their interest to not only keep you safe, but sell you tyres too
It is called "An advisory"
Best check the depth yourself
Ed- you've got a fair few miles left yetLast edited by Chris_Blue; 27-07-2015, 20:17.sigpicJog on Noddy
Comment
Comment