Tweet
Be aware, I think you`re guarantee expired when you do this
First you need yo know which wire is for the DRL.
Remove the cover off the fuse box under the hood.
there are 3 big connectors, you need the middle brown connector.
Disconnect this one, there is one thick blue wire which u need.
Then you need to make a extra 12v feed.
I used a double 1.5mm2 cable.
You need to make a separate 12v feed, I made this in the front of the fuse box on the bolt there
I don`t know how this connector is called but pictures say enough.
Also you can see the fuse holder, I used a 5A fuse.
Then you go with this cable to inside your car, I don't know what is the best way to do this because you all have the steering wheel on the wrong side
I made my own switch in the existing buttons.
You can make this were ever you want.
When you cut away a little peace of the buttons the wires fit perfect threw the hole.
These switches are very easy to open, when you look at it the way to do
this is very clear.
The cable that go`s back to the fuse box is connected to the blue wire, you can solder this on or use a conecter as is seen in the second picture.
This all is very easy to do en when you have all the tools, it is not more than one hour work.
Now You can do this:
The car don`t have to be on contact, but never forget to turn of the DRL, mine were on for 3 days, I could steel start the car but it is not good I think.
PLEASE help me where i`m wrong or used the wrong words, I hope I can help you this way.
First you need yo know which wire is for the DRL.
Remove the cover off the fuse box under the hood.
there are 3 big connectors, you need the middle brown connector.
Disconnect this one, there is one thick blue wire which u need.
Then you need to make a extra 12v feed.
I used a double 1.5mm2 cable.
You need to make a separate 12v feed, I made this in the front of the fuse box on the bolt there
I don`t know how this connector is called but pictures say enough.
Also you can see the fuse holder, I used a 5A fuse.
Then you go with this cable to inside your car, I don't know what is the best way to do this because you all have the steering wheel on the wrong side
I made my own switch in the existing buttons.
You can make this were ever you want.
When you cut away a little peace of the buttons the wires fit perfect threw the hole.
These switches are very easy to open, when you look at it the way to do
this is very clear.
The cable that go`s back to the fuse box is connected to the blue wire, you can solder this on or use a conecter as is seen in the second picture.
This all is very easy to do en when you have all the tools, it is not more than one hour work.
Now You can do this:
The car don`t have to be on contact, but never forget to turn of the DRL, mine were on for 3 days, I could steel start the car but it is not good I think.
PLEASE help me where i`m wrong or used the wrong words, I hope I can help you this way.
Comment