Bigfeet's File Repository - Useful documents for DS3

[MYPDS3]

Any help on the front and rear wheel bearings Bigfeet? Cheers

[Bigfeet]

Any help on the front and rear wheel bearings Bigfeet? Cheers

Added

DS3 - Removing/Refitting - Front Pivot - https://www.mediafire.com/?t66mi66m4v2cm34

DS3 - Overhaul Front Wheel Bearing - http://www.mediafire.com/view/t66mi6..._diameter).pdf

[Bigfeet]

For some reason I can't edit for first post but here is another addition to the list.

DS3 - Removing Wipers/Wiper Motor - http://www.mediafire.com/view/h44sjs...iper_Motor.pdf

[quintinf]

how to config the new triple xenon headlight because i have trouble with the sidelights

[Dangerousfish]

how to config the new triple xenon headlight because i have trouble with the sidelights

[ATTACH=CONFIG]10591[/ATTACH]

As a guess, this may require the use of a Lexia to apply any firmware updates. A Citroen dealer should be able to assist you with this.

[quintinf]

sorry i mean the indicator lights the rest works fine

[Bigfeet]

The only way the lights or indicators are programmed is through the Dialog box (lexia), the reason for this is that they form part of the COMM system of the car.

Best option would be a friendly dealer

[MARK.A]

There is no programme in dialog box for the new style lights it's all done via the printed circuit board under the lights which without the led side lights and indicators don't work maybe a faulty circuit board

[quintinf]

Thanks mark for The info

[kenwilcox]

Engine coolant sensor

Anyone know where the engine coolant sensor is located, I think mine is faulty. Gauge reads hot for a few seconds
after starting from cold and the "stop" warning light flashes with the message "engine temp fault". 1.6 diesel. Thanks

[bkwhoper]

just looking at the fog light removal instructions, is this also the same process for just replacing the chrome housing? thanks

[cyclone]

The fog light chrome is stuck on with an adhesive tape

[bkwhoper]

okay thanks, im looking to change these so i presume that i take out the whole light, stick the new surround on and the put it all back in place?

[cyclone]

Not attached to light but to the bumper.

[Phydough]

Nice one, thanks