Announcement
Collapse
No announcement yet.
temperature gauge
Collapse
X
-
My last THP 150 was dead centre, and my current THP 155 is just over (About as much as you are under) and has been ever since Ive had it
Depends also where yours bottoms out when cold, Mine looks like it doesn't quit bottom out even when switched off for couple days, so makes sense to be just over
So may not be installed with deadly accuracy, either yours, or mine
Torque pro app states exact coolant temperature- and mines bang on 105 deg c pretty much all the time
So for me, I wouldn't worry bout your display. Unless it varys regularsigpicJog on Noddy
-
My previous DS3 was dead central after it was warmed up, I'm pretty sure my current one is the same although tbh I haven't looked properly.
Comment
-
Originally posted by ljwjones View Post[ATTACH=CONFIG]10464[/ATTACH][ATTACH=CONFIG]10464[/ATTACH]
Is this normal for the temperature gauge. It sits there and doesn't move its just not central?sigpic
Current: DS3 Performance Black Edition
Previous: DS3 110Hdi Dsport Plus
Comment
-
Mines the same as that aswell. Just slightly left of middle.
The stop start thing is very picky apparently and doesn't tend to work in winter. As the weather gets warmer it should start working again as you don't need to have your lights on And your wipers on and the air temp is warmer stuff like that. It doesn't like it when there are things that drain the battery
Comment
-
I am glad to see I am not alone with it not sitting in the middle!!
The stop/start is just annoying, I even tried turning the radio off, lights to just DLR's and air con off and still not luck....hopefully will kick in and start working at some point. Got another week before ~I can give him a good run at quicker than 12 mph average, maybe after that it'll work.
Comment
-
Mine sits slightly over, but it's always done that so not worried.
Comment
-
If you are concerned about your Stop/Start then you can have you dealer run a test on it such as a Global test to confirm that the system is 100%. The only thing is that you may be charged for the check as it's not really a warranty issue, but that depends on the dealer....I should never have doubted the Lord of Bacon!!
The DS3Club Bacon Appreciation Society
Comment
-
-
Originally posted by Bigfeet View PostIf you are concerned about your Stop/Start then you can have you dealer run a test on it such as a Global test to confirm that the system is 100%. The only thing is that you may be charged for the check as it's not really a warranty issue, but that depends on the dealer.
Comment
Comment