how save would it be to run stage2 with stock dv on the thp?
Announcement
Collapse
No announcement yet.
how save is stage 2 with stock dv thp
Collapse
X
-
I would not let the valve stop you from your other upgrades. As long as it is in good shape it is not going to damage anything short term to leave the stock one on. Just would need to be taken care of eventually.Originally posted by cyclone
It is in the handbook. Satisfied.
Originally posted by Broda
I would rather teabag a bear trap
Comment
-
Agree with Cyclone^
Just take the stock DV off every now and again and check the plastic outer case, and diaphragm thing isnt detiorating cos of excess heat
Read the thread on the upgrade spring for the stock DV, it did make a little difference in smoothness for me, but i swapped out for the "G" internals too.
Think Jamie sells them for a £10, and sure he could post you one for a little extrasigpicJog on Noddy
Comment
-
I found my standard DV was warn, and I was hearing a faint whistle as it dumped the turbo pressure when lifting off he throttle. upgraded the internals to a VAG REV D one and feels much better now.Last edited by Toxic; 21-09-2014, 16:23.
Comment
-
Originally posted by Toxic View PostI found my standard DV was warn, and I was hearing a faint whistle as it dumped the turbo pressure when lifting off he throttle. upgraded the internals to a VAG REV D one and feels much better now.
Comment
-
Originally posted by Chris_Blue View PostWould not do it myself- there has been some issues with stock DV on remapped THPs. Extra heat doesnt help
Get a Forge one..... ;-)
If you use stock DV, certainly dont use it forever
They break down after bout 20k miles
As for the thread - yes! get a Forge DV... and not the blow off one!
Comment
Comment