Announcement

Collapse
No announcement yet.

Connecting After Market Head Unit Guide

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    This is what I got:
    Connects 2 CTSCT003 - Citroen C2, C3, C4, C5 MKII, C8 Stalk Control

    I don't have factory hifi, satnav or reversing sensors but I've just looked at the wiring diagram for this adapter and it shows wires to reverse and sensors.

    £34.99 plus a fiver for the alpine lead and 8 quid for the amplified fakra convertor.

    Comment


    • #62
      Originally posted by telephoneman View Post
      This is what I got:
      Connects 2 CTSCT003 - Citroen C2, C3, C4, C5 MKII, C8 Stalk Control

      I don't have factory hifi, satnav or reversing sensors but I've just looked at the wiring diagram for this adapter and it shows wires to reverse and sensors.

      £34.99 plus a fiver for the alpine lead and 8 quid for the amplified fakra convertor.
      Thanks!
      sigpic.

      | DStyle Nav 1.2 PureTech 110 |
      Third time around.
      Work in Progress

      Comment


      • #63
        Originally posted by telephoneman View Post
        This is what I got:
        Connects 2 CTSCT003 - Citroen C2, C3, C4, C5 MKII, C8 Stalk Control

        I don't have factory hifi, satnav or reversing sensors but I've just looked at the wiring diagram for this adapter and it shows wires to reverse and sensors.

        £34.99 plus a fiver for the alpine lead and 8 quid for the amplified fakra convertor.
        CTSCT003 is only to retain the stalk controls. If you want to continue using both reverse sensors and stalk controls purchase item CTHCT01.

        Comment


        • #64
          When I fit it the stalk works for the setting but doesn't control the sound an stuff

          Is this normal?
          sigpic.

          | DStyle Nav 1.2 PureTech 110 |
          Third time around.
          Work in Progress

          Comment


          • #65
            Originally posted by Rickzayne View Post
            When I fit it the stalk works for the setting but doesn't control the sound an stuff

            Is this normal?
            My Aftermarket head unit works fine with all stalk controls Rick....Might be wrong adaptor ??.

            Comment


            • #66
              No, mine works fine - the button on the end of the RH stalk cycles through radio, usb etc. The volume works as before. The upper and lower stalk buttons change tracks on CD, usb etc and the "wheel" will change folders on usb.

              Comment


              • #67
                Might be the installer

                Comment


                • #68
                  Hmmm I ordered the one from above at the start of the thread?

                  You think it could be the stereo?
                  sigpic.

                  | DStyle Nav 1.2 PureTech 110 |
                  Third time around.
                  Work in Progress

                  Comment


                  • #69
                    Remove the head unit again Rick and check connections you may have pulled them apart without realising as i know it's a bit of a squeeze lol.

                    Comment


                    • #70
                      Originally posted by Rickzayne View Post
                      Hmmm I ordered the one from above at the start of the thread?

                      You think it could be the stereo?
                      Which one was it ??

                      Comment


                      • #71
                        Rick have you got a patch lead fitted for your head unit ??

                        Comment


                        • #72
                          Sony nsx-s100
                          sigpic.

                          | DStyle Nav 1.2 PureTech 110 |
                          Third time around.
                          Work in Progress

                          Comment


                          • #73
                            http://pdf.crse.com/manuals/4180029111.pdf

                            this is the guide to my stereo... im guessing the 'emote in' is where i put the patch lead? as thats the only socket on the back.. and it offers no details on what its actually for
                            sigpic.

                            | DStyle Nav 1.2 PureTech 110 |
                            Third time around.
                            Work in Progress

                            Comment


                            • #74
                              Yeh thats the one Rick...Can be used to tun on amplifier aswell

                              Comment


                              • #75
                                -.- ill just have to wait and see what dynamic sounds say about the cable vs the stereo xD
                                sigpic.

                                | DStyle Nav 1.2 PureTech 110 |
                                Third time around.
                                Work in Progress

                                Comment

                                Working...
                                X